Kato C44-9W

Kato-C44-9W-820043-2


The Soundtraxx’ Atlas light board type decoder is used. Now that the QSI Revolution A and Tsuanmi diesel Atlas light board version decoders have been released, they would be the decoder of choice.

The speaker is cantilevered off the rear weight with Bathtub Caulk. Sheet styrene is used to assure a tight fit with the shell. When the shell is installed, an infinite port enclosure is created. Note: the sound is virtually inaudible until the shell is installed.

Here is a close-up photo of the speaker installation in another unit (that required a coupling capacitor):

Kato-C44-9W-DSX-DH163K0-0


THE FOLLOWING IS RETAINED FOR HISTORICAL DATA:
Replacing the Kato white LEDs with Golden White LEDs is a good move. Soundtraxx does NOT recommend LEDs with LC deco
ders, as the rear light will glow occasionally as commands are processed. See the SoundTraxx LC series decoders page for more information.

Copyright © Bruce F. Petrarca 2007 - 2017; All Rights Reserved