Overland Models SD45-2

Lots of sound from this fine model!

Bruce mounted four speakers below the fan and exhaust openings in the top of this loco, after removing the light board. Bits of styrene were used to assure a seal between the speakers and the shell as can be seen in the detail photo.

OMI-SD45-2-827102-2


The 1.5 volt lights were supplied through 240 ohm resistors and a pair of 1N4001 diodes for both front and rear. For more information on this - CLICK HERE.

OMI-SD45-2-827102-4


Copyright © Bruce F. Petrarca 2007 - 2017; All Rights Reserved